Ducted and ductless heat pumps heat your Metro Vancouver home in winter and cool it in summer — all from one energy-efficient system. Available rebates and incentives can significantly reduce your upfront cost.
From the first calculation to the final walkthrough, every step is handled by our certified team — so all you do is enjoy the comfort.
Manual J heat-loss analysis ensures your system is perfectly sized — not oversized, not undersized — for maximum efficiency and comfort.
We recommend proven cold-climate models from Daikin, Mitsubishi, Carrier and Lennox — matched to your home and budget.
TECA-certified technicians install your system cleanly and on schedule, with full permit and inspection handling.
Panel upgrades and dedicated circuits included when needed — our licensed electricians handle it all in the same visit.
We help confirm your eligibility for available CleanBC and utility incentives, then assist with the application process on your behalf.
We walk you through your new system's controls, thermostat programming and maintenance schedule before we leave.
Heat pumps move heat rather than producing it through electric resistance or combustion. Their efficiency and low-temperature capacity vary by model and operating conditions. For BC homes, equipment should be selected using the home's heating load and verified manufacturer performance data at local design conditions.
Extracts heat from outdoor air — even at -25°C — and transfers it inside. Modern cold-climate models deliver efficient warmth well below freezing.
Reverses the cycle to remove heat from your home and expel it outside — delivering quiet, energy-efficient air conditioning all summer long.
Because heat pumps move heat rather than generate it, they deliver 2 to 4 units of heating for every unit of electricity consumed — reducing your energy bills significantly.
For most BC homes, a heat pump is cheaper to run, cleaner, and more versatile than a gas furnace or electric baseboard.
| Feature | Heat Pump ✓ | Gas Furnace | Electric Baseboard |
|---|---|---|---|
| Heating efficiency | 200–400% (moves heat) | 80–97% (burns gas) | 100% (resistance heat) |
| Air conditioning | Included — same system | Extra $3,000–$8,000 | Not included |
| Avg. monthly energy cost | $60–$120 | $120–$220 (gas) | $160–$280 (BC Hydro) |
| Carbon emissions in BC | Near-zero (BC Hydro is 98% clean) | High — natural gas | Low, but costly |
| CleanBC rebate available | Yes — eligibility confirmed at assessment | None | None |
| Works in BC winters | Yes — rated to −25°C | Yes | Yes (expensive) |
| Annual energy savings vs. baseline | Varies by home & system | Baseline | Generally higher |
Energy costs depend on home size, insulation, usage, equipment efficiency, and current utility rates. A proper load calculation is needed for accurate estimates.
No existing ductwork? A ductless mini-split heat pump is the fastest, most cost-effective way to add efficient heating and cooling to any space.
One outdoor unit connected to one indoor wall-mounted head. Perfect for a living area, bedroom, home office or suite — installed in as little as one day.
One outdoor unit powers multiple indoor heads — each with independent temperature control. The most flexible way to heat and cool an entire BC home without ducts.
If your Metro Vancouver home already has ductwork, a ducted cold-climate heat pump replaces your furnace or air handler for invisible, whole-home comfort.
Installed costs vary by system type and home size. Available rebates and incentive amounts depend on the homeowner, existing heating system, equipment selected and current program requirements — we confirm your eligibility at your free assessment.
One outdoor unit, one indoor head. Ideal for a single room, basement suite, or home addition. Installed in as little as one day.
One outdoor unit, 2–5 indoor heads with individual room control. The most common choice for Metro Vancouver homes without existing ducts.
Connects to your existing ductwork and air handler. The cleanest solution for homes already equipped with vents — no visible indoor units.
Flexible financing options can help spread the cost of a new system. Note: the Canada Greener Homes Loan is closed to new applicants. Ask us during your free assessment about current financing options.
Available rebates and incentive amounts depend on the homeowner, existing heating system, equipment selected and current program requirements. Climax Energy can help homeowners review available incentives before installation.
BC's CleanBC program offers heat pump rebates to eligible homeowners. The amount depends on current program rules and factors such as household eligibility, existing heating fuel and equipment selected. Rebate eligibility should be confirmed using current program requirements before making a purchase decision. Climax Energy will review your options at your free in-home assessment.
We size every system with a proper heat-loss calculation, install with certified technicians, and help navigate the rebate process — so you get the best comfort and the best return.
Service Areas
Climax Energy installs ducted, ductless and cold-climate heat pump systems across Metro Vancouver and the Fraser Valley. Explore heat pump installation services and local information for your community.
BC's CleanBC program offers heat pump rebates to eligible homeowners. Available amounts and program requirements change periodically. Eligibility depends on factors such as your current heating system, household income, equipment selected and current program rules. Climax Energy will confirm your eligibility and available incentives at your free in-home assessment before you make any commitment.
Most Metro Vancouver homeowners replacing an existing primary heating system with a qualifying cold-climate heat pump will have access to some level of rebate. The key factors are your current heating fuel type, home size, household eligibility and the equipment model selected. Climax Energy provides a free eligibility assessment to confirm what you qualify for before you commit to anything.
A ductless heat pump (also called a mini-split) consists of an outdoor compressor and one or more indoor wall-mounted heads, connected by a refrigerant line through a small 3-inch wall penetration — no ductwork needed. Ductless heat pump installation in Metro Vancouver typically takes 4–8 hours for a single zone. The system provides both heating and cooling, and most ductless models qualify for CleanBC heat pump rebates.
Single-zone ductless heat pump installation typically takes 4–8 hours. Multi-zone ductless systems or ducted whole-home replacements generally take 1–2 days. Our TECA-certified technicians handle permits, city inspections and electrical connections — leaving your home clean and your new system fully operational.
Yes — modern cold-climate heat pumps operate efficiently down to -25°C. Metro Vancouver winters rarely drop below -10°C, making a heat pump an ideal primary heating source here. The Daikin, Mitsubishi and Carrier models we install are rated for BC's climate and keep your home comfortable all winter without a backup furnace in most cases.
We install heat pumps — ductless and ducted — throughout Metro Vancouver including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Moody, Delta, Langley and Maple Ridge. Call (250) 201-2030 or book online for a free in-home assessment.
Homeowners switching from electric baseboard heating may see meaningful reductions in heating energy use — some report significant savings, though results vary considerably by home size, insulation, usage habits and current electricity rates. Heat pump efficiency and actual savings depend on the specific model, sizing and operating conditions. BC Hydro's electricity is 98% clean hydropower, making a properly sized heat pump one of the most cost-effective and low-emission heating options available in BC.
Flexible financing options may be available to spread the cost of a new system. Note: the Canada Greener Homes Loan is closed to new applicants. Ask us during your free assessment about current financing options available to you.
We install Mitsubishi Electric, Daikin, Carrier and Lennox — all leading cold-climate brands with proven BC performance records. We recommend the model that best matches your home's heating load, layout and budget. All brands we install meet or exceed CleanBC's variable-speed and HSPF2 requirements.
Heat pumps benefit from annual preventive maintenance — filter cleaning, coil inspection, refrigerant pressure check and electrical connection tightening. Regular maintenance helps protect equipment lifespan and efficiency; check your manufacturer's documentation for specific warranty requirements. Climax Energy offers maintenance plans covering your heat pump and backup systems. We service all brands across Metro Vancouver, not just systems we installed.
Book your free in-home assessment today. We'll size the perfect heat pump for your home, review every rebate you may qualify for, and give you a fixed, honest quote.
Troubleshooting guides, cost information, and buying advice to help you make informed decisions about heat pumps in Metro Vancouver.
